Antari Lighting and Effects HZ-350 Work Light User Manual


 
6
OUTPUT UNDER TIMER MODE
Press Up/Timer button to execute the interval/duration timing set and press Stop
to stop.
OUTPUT UNDER CONTINUOUS OUTPUT MODE
Press Down/On button to output continuously until Stop button is pressed.
REMOTE CONTROL OPERATION
W-1:The wireless remote control W-1 consists of a transmitter equipped with two buttons
for fog on and off, and a receiver pre-attached to HZ-350.
* Transmitter
With the transmitter it is possible to emit fog via radio over a distance of up to 50 meters.
The transmitter is compatible to any receiver of HZ-350 and can control an unlimited
number of machines in parallel. Press the button “A”, to emit fog. As control, the LED on the
transmitter is lit. To stop the fog output, press the button “B”.
* Receiver
The receiver is tested and built in HZ-350. Please do not try to remove it. The receiver
responds to up to 5 different transmitters that are registered with the machine. The included
transmitter has been registered with the machine before shipment. It can be directly
operated without any start-up setting.