Antari Lighting and Effects HZ-350 Work Light User Manual


 
7
Battery change on the transmitter
If the range of the transmitter decreases, the battery is probably exhausted and must be
replaced. For this purpose, take off the housing cover and remove the used battery. Insert a
fresh 12 V battery, and refit the housing cover.
HC-1(Optional): 10 meter wired multi-function remote controller with 1/4” stereo plug.
Red Button – Control ON/OFF
By having the red button pressed, HC-1 is activated and ready for using. The red indicator
light will be on whenever HC-1 is on.
Green Button – Haze
Keep the green button pressed; the unit will output continuously. Release the button to
stop.
Yellow Button – Timer ON/OFF
Duration and Interval Knobs
Press the yellow button to activate the timer function for the knobs DURATION and
INTERVAL located on the top of the controller. Adjust the interval between each haze
emission (within the range from 10 to 200 seconds) by means of the INTERVAL control
knob. Adjust the duration of each haze emission (within the range from 5 to 100 seconds)
by means of the DURATION control knob.