Filter
Top Products
* {adrs}T
Step infinitely. The TRACE command stops only when it executes a BRK instruction
or when you press RESET. (T=trace)
* Contrl-E
Displays the contents of the 6502's registers. (E=examine)
* I
Set Inverse display mode.
* N
Set Normal display mode. Also useful as a delimiter for putting multiple commands
on one line.
* Control-B
Enter the language currently installed in the Apple's ROM (cold start at $E000).
* Control-C
Reenter the language currently installed in the Apple's ROM (warm start at $E003).
* {val1}+{val2}
Add the two values and print the result.
* {val2}-{val1}
Subtract the second value from the first and print the result.
* {slot} Control-P
Divert output to the device whose interface card in in slot number {slot}. If
{slot}=0, then route output to the Apple's screen.
* {slot} Control-K
Accept input from the device whose interface card is in slot number {slot}. If
{slot}=0, then accept input from the Apple's keyboard.
* Control-Y
Jump to the machine language subroutine at location $03F8. This lets you add your
own commands to the Monitor.
The Mini-Assembler.
* F666G
Invoke the Mini-Assembler.
* ${command}
Execute a Monitor command from the Mini-Assembler.
* FF69G
Leave the Mini-Assembler.