Filter
Top Products
LIBRA-04 M MANUAL COPY ROUTER
10 / 19
IV – INSTALLATION
The Libra-04 M Manual Copy Router is factory tested to ensure that the electrical
system and all mechanical components work properly. All material and spare parts sent
from the factory have been thoroughly checked before consignment to the transportation
agency.
On receiving the equipment, check for any damage which may have occurred during
transportation.
IV.1 – MACHINE LIFTING AND MOVING
The equipment is delivered in its own special packing. Check the stability and
positioning of the load on the forks. Keep the load as low as possible when moving, for
greater stability and better visibility. Forks should be opened with maximum angle.
1. When carrying, make sure not to damage cables, cylinders, hose, regulator and
control panel.
2. Upon carrying, avoid to get a damage to the machine.
3. Carrying the machine must be done only with a proper size of forklift.
Before lifting, ensure that the lift truck fingers are clear of any wires that may be
damaged if pinched between the fingers and the machine.
Picture 4-1 Machine Lifting and Moving