Filter
Top Products
12
Operating and Safety Instructions
3.3.15.
If you are required to operate the machine outside, use only appropriate
extension cables.
3.3.16.
Repairs should be carried out by qualified technicians only. Otherwise,
accidents may occur.
3.3.17.
Before starting a new operation, check the appropriate function of
protective devices and tools, ensure that they work properly. All conditions have to
be fulfilled in order to ensure proper operation of your machine. Damaged
protective parts and equipment have to be replaced or repaired properly (by the
manufacturer or dealer).
3.3.18.
Don’t use machines with improper functioning buttons and switches.
3.3.19.
Don’t keep flammable, combustive liquids and materials next to the machine
and electric connections.
4. TRANSPORT OF THE MACHINE
4.1.1.
The transport should be done by qualified personnel only.
4.1.2.
The machine should be transported by lifting with proper equipment (not touching
the ground during the transport).
4.1.3.
Machines are covered with nylon for delivery, unless the customer has not required
other method of packing.
4.1.4.
For the weight, dimensions and technical features of the machine please see
page 5.
4.1.5.
Movable parts on the machine should be fixed before carrying out the transport.
5. INSTALLATION OF THE MACHINE
5.1. PREPARATION
5.1.1.
The outer dimensions of the machine are mentioned under Technical Features on
page 5. The ground, where the machine will be placed, should be even, solid enough
to bear the weight of the machine.
5.1.2.
The machine should be located approx. 50 cm away from the rear wall. The power
connection plug of the machine is located on the rear side of the machine.
IMPORTANT