Filter
Top Products
14
Operating and Safety Instructions
5.2. ELECTRIC CONNECTION
5.2.1 The three-phase electric cable socket has to be in accordance with the socket on
the machine.
5.2.2 At our models LIBRA-02 M the voltage can be chosen as 230V 50 Hz (110V 60Hz)
or 400V 50 Hz (220V/440V 60Hz). The voltage at our model LIBRA-02 HM is 400V 50 Hz
(220V/440V 60Hz) as per standard.
5.2.3 Plug the machine to a grounded socket.
5.2.4 Check the supply voltage. The source voltage must be in accordance with the
data on the machine’s label.
5.2.5. The electric connections have to be carried out by a qualified electrician only. The
rotation direction must be observed by starting the machine. If the rotation of the router
bit or drill is in reverse direction, the clamp wire connections have to be checked and
the connections changed as appropriate.
5.2.6. If the router bit rotation direction is reverse, it causes danger both for the operator
and equipment. This can cause the cutting tools to break or get damaged.
NOTE: THIS IS VALID FOR THREE-PHASE MOTORS.
6. MACHINE SAFETY INFORMATION
6.1.1 The machine should not be used without the transparent protection shield in front
of the router bit.
6.1.2 Lifting, installation, electric maintenance of the machine should be carried out by
qualified personnel only.
6.1.3 Routine maintenance and scheduled maintenance should be carried out by
qualified personnel after unplugging the machine first.
6.1.4 Ensure that the machine has been cleaned, tested and maintained before starting
to operate it.
6.1.5 Check the safety devices, power cable and moving parts regularly. Don’t operate
the machine before having replaced defective safety devices or faulty parts.
6.1.6 Never replace the router bit or drill bits before unplugging first.
6.1.7 Keep foreign materials away from the working area of the machine, keep away
from the machine’s moving parts.
The safety data have been defined above. In order to prevent physical damage or
damage to the equipment, please read the safety information carefully and keep the
manual always in an easy accessible place.
CAUTION !
IMPORTANT