Filter
Top Products
2
ULTRAPAR UP1200
Safety instructions
CAUTION
To reduce the risk of electrical shock, disconnect the spotlight from the mains before cleaning or
servicing the unit. No user serviceable parts inside; refer servicing to qualied personnel.
WARNING
To reduce the risk of re or electrical shock, do not expose the spotlight to rain or moisture.
Detailed safety instructions:
Read these instructions.1)
Keep these instructions.2)
Heed all warnings.3)
Follow all instructions.4)
Do not use this apparatus near water.5)
Clean only with dry cloth.6)
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.7)
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 8)
ampliers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades 9)
with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
Place the power cord so that it is protected from being walked on and sharp edges. Be sure that the power cord 10)
is protected particularly at plugs, convenience receptacles and the point where it exits from the apparatus.
The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.11)
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall 12)
remain readily operable.
Only use attachments/accessories specied by the manufacturer.13)
Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. 14)
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.15)
Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged 16)
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
The spotlight has not been designed for outdoor use, and should be used in dry rooms only, with a humidity 17)
below 90%. Don’t use the spotlight near water (e.g. bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.).
Be sure to install a lens and attach the protective mesh before you attempt to operate the spotlight. The locking 18)
bracket of the color frame must be locked before the spotlight is switched on.
The spotlight must always be mounted and secured using the corresponding retention holes in the mount-19)
ing bracket. When using a stand or hook clamp, be sure to attach the spotlight with a tightened steel screw
(M12), washer and locknut. Additionally, the spotlight must be secured on the truss or stand with a safety
steel cable.
The spotlight must be mounted at a minimum distance of 2 m from the illuminated object, as the light beam can 20)
heat any such object to a temperature of 90°C. Avoid using easily ammable materials in the light beam.
The spotlight should be situated so that its location or position does not interfere with its proper ventilation. 21)
For example, the spotlight should not be situated on a bed, sofa rug, or similar surface; the same applies to
truss-mounted operation: proper ventilation must always be ensured.