Filter
Top Products
Lamp4
ULTRAPAR UP1200
Introduction1.
Congratulations! With the BEHRINGER ULTRAPAR UP1200 you purchased a rst-class PAR spot-
light mounted in a compact, extremely robust and durable casing and featuring a comprehensive
range of accessories.
Before you begin1.1
Your ULTRAPAR was carefully packed in the factory and the packaging is designed to protect the unit
from rough handling. Nevertheless, we recommend that you carefully examine the packaging and its
contents for any signs of physical damage, which may have occurred during transit.
If the unit is damaged, please do not return it to BEHRINGER, but notify your dealer and +
the shipping company immediately, otherwise claims for damage or replacement may
not be granted. Shipping claims must be made by the consignee.
Online Registration1.1.1
Please remember to register your new BEHRINGER equipment right after your purchase by visit-
ing www.behringer.com (alternatively www.behringer.de) and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible.
Please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer
not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact
information is included in the original equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please contact the distributor nearest you. A
list of distributors can be found in the support area of our website (www.behringer.com/support).
Registering your purchase and equipment with us helps us process your repair claims quicker and
more efciently.
Thank you for your cooperation!
Mains connection1.2
Prior to the initial operation of the spotlight UP1200, a mains plug must be attached to the power
cord. Please use a commercially available shockproof plug with a minimum power rating of 2.5 A
(220 / 240 V). The wires of the connecting cable are clearly marked according to their function.
The spotlight can be operated from a power supply of max. 120 V / 5 A or 240 V / 2.5 A AC. The
mains frequency should be 50 / 60 Hz.
Please note that your ULTRAPAR spotlight must be grounded properly. For your own +
safety, you should not remove or defeat the ground connection of the spotlight or power
cord.
Make sure that the spotlight will be installed by qualied personnel only. +
Lamp2.
The halogen lamp needed for using the UP1200 is not included with the shipment. To start using your
ULTRAPAR spotlight, use the BEHRINGER 575H (575 Watts at 110 V / 230 V) or any other compat-
ible lamp with the G9.5 socket. Make sure that the lamp you use is compatible with local voltage.
If the lamp is operated with a voltage surpassing its nominal operating voltage, it can +
be damaged / destroyed or its service life reduced considerably.