Filter
Top Products
1 689 989 072 2010-04-06| Robert Bosch LLC
Commissioning | KTS 340 | 9KTS 340 | 9 | 9 en
4. Commissioning
4.1 Connection
Prior to commissioning, make sure the mains voltage
matches the voltage specified on the power supply unit
(use the power supply lead provided).
4.2 Licensing with the
ESI[tronic] Startcenter
The KTS 340 is supplied pre-installed and pre-licensed
and can be used immediately for control unit diagnosis.
The KTS 340 has to be re-licensed to be able to utilize
the functions detailed in the purchase contract and to
implement further updates. The customer number and
password required for this can be found on the delivery
note.
! Do not connect the KTS 340 to the PC/laptop until
prompted to do so during the installation routine.
4.2.1 Installing the ESI[tronic] Startcenter
Procedure:
1. Close all open applications.
2. Insert the "ESI[tronic] Startcenter" DVD.
3. Open the "Windows Explorer".
4.
Start D:\setup.exe (D = DVD drive).
? Setup commences.
? The following message appears with WIN Vista:
An unidentified program is attempting
to access the computer.
? The following message appears with WIN 7:
Do you wish to allow changes to be
made to this computer by the fol-
lowing program?
5. Confirm the message with "Allow" or "Yes".
6. Select the installation language and confirm with <OK>.
i The selected installation language will also be the
language used in the ESI[tronic] Startcenter.
7. Follow the on-screen instructions.
i Select the country in which the KTS 340 is to be
used in the "Country selection" installation menu.
The dialog box does not appear if a country was
already selected during an earlier installation of
Startcenter (e.g. with KTS 200).
i If Adobe Reader is not yet installed on the PC/laptop,
it will be installed at the end of the ESI[tronic] Start-
center installation routine. Adobe Reader is required
to display the KTS 340 control unit diagnosis logs on
the PC/laptop.
i We recommend that you only install the KTS data
packet on the hard disk if you wish to update several
KTS units. Then, the ESI[tronic] Startcenter DVD will
not be required for update.
? The following message appears with WIN Vista:
Do you wish to install this device
software?
8. Confirm the message with "Install".