Filter
Top Products
DP5UL 5 Speed Drill Press Assembly & Operating Instructions
5
Wash hands after handling the power cord. Touching the power cord could expose you to lead, which
is known in the State of California to cause cancer, birth defects and other reproductive harm.
All work areas should be clean and well lit. Accidents are more likely to occur in poorly lit and
cluttered areas.
Keep children, and other distractions at a distance while operating power tools.
Keep the power cord in good condition, and replace damaged cords immediately. Do not use the
cord to pull the plug from the outlet. Keep the cord away from materials and surfaces that could
damage cords. The risk of electric shock increases when the power cord is damaged.
Always use the appropriate extension cord, making sure it is rated for use with drills. Always be sure
the extension cords are in good condition, free of cuts or nicks in the insulation. If using the drill in an
outside area with an extension cord, make sure the cord is rated for outdoor use.
Do not make contact with a grounded surface while using this power tool. Contact with surfaces like
pipes, radiators or major appliances increases your risk of electric shock.
Use common sense while operating this drill.
Do not use this drill if you are:
Feeling tired or are under the influence of alcohol or drugs.
Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts.
Overreaching or have improper footing. Handling the tool in this way could cause serious injury.
When using this drill always:
Wear the proper safety equipment, such as safety goggles, dust masks, non-skid shoes, etc.
Be sure all adjusting keys or wrenches have been removed before starting the drill.
Be sure the power switch is in the “OFF” position before plugging the drill into an electrical outlet.
Safety glasses and ear protection must be worn during operation.