Filter
Top Products
DP5UL 5 Speed Drill Press Assembly & Operating Instructions
7
IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING THIS TOOL, YOU NEED TO BECOME FAMILIAR WITH ITS OPERATION. IF YOU ARE
UNSURE ABOUT THE OPERATION OF THE TOOL, OR HAVE ANY QUESTIONS ABOUT ITS PROPER
USE, CALL THE CUSTOMER SERVICE DEPARTMENT AT 1-888-287-6981. FOLLOW THESE
INSTRUCTIONS FOR SAFE HANDLING OF THE TOOL:
Always secure and support the work piece using clamps. Do not use your hands to hold the piece in
place.
Be sure your work area is clean and secure before turning the power switch into the “ON” position. Be
sure the area is free from all foreign material, nails, staples, or any other material.
Turn the drill “OFF” and unplug from the power source before making any changes or adjustments to
the drill.
Do not use solvents containing carbon tetrachloride, ammonia or acetone to clean the drill. Never use
gasoline, paint thinner, or other caustic chemicals that can damage the plastic parts of the tool.
Always use the appropriate safety gear when operating this drill. Including but not limited, to goggles,
dust mask or respirator. Always work in a well-ventilated area to reduce your exposure to harmful
chemicals and dust particles.
Keep hands away from the cutting area.
Do not reach under the work piece.
SPECIFIC SAFETY RULES AND/OR SYMBOLS
SYMBOLS
THE FOLLOWING SYMBOLS MAY BE USED ON YOUR TOOL. BE FAMILIAR WITH AND LEARN THE
SYMBOLS TO OPERATE THE TOOL SAFELY.
SYMBOL
NAME
DESCRIPTION
V
VOLTS
VOLTAGE (POTENTIAL)
A
AMPERES
CURRENT
HZ
HERTZ
FREQUENCY (CYCLES PER SECOND)
W
WATT
POWER
KG
KILOGRAMS
WEIGHT
ALTERNATING CURRENT
TYPE OF CURRENT
DIRECT CURRENT
TYPE OF CURRENT
ALTERNATING OR DIRECT
CURRENT
TYPE OF CURRENT
EARTHING TERMINAL
GROUNDING TERMINAL
CLASS II CONSTRUCTION
DENOTES DOUBLE INSULATION
MIN
MINUTES
TIME
S
SECONDS
TIME
DIAMETER
SIZE OF DRILL BITS, GRINDING WHEELS, ETC.
NO LOAD SPEED
NO-LOAD ROTATIONAL SPEED
…/MIN
REVOLUTIONS PER MINUTE
REVOLUTIONS, SURFACE SPEED, STROKES, ETC. PER
MINUTE
1,2,3…
RING SELECTOR SETTINGS
SPEED, TORQUE OR POSITION SETTINGS