Campbell Hausfeld CE9000 Air Compressor User Manual


  Open as PDF
of 60
 
Operating Instructions
www.CH-Commercial.com
Maintenance (Continued)
COMPONENTS
Turn off all power and clean the cylinder
head, motor, fan blades, air lines,
intercooler and tank on a monthly basis�
BELTS
Lock out and tag the
power then release all
pressure from the tank to prevent unexpected
movement of the unit.
Check belt tension every 3 months�
Adjustbelttensiontoallow3/8inchto
1/2 inch deflection with normal thumb
pressure� Also, align belts using a straight
edge against the face of the flywheel and
touching the rim on both sides of the
face� The belts should be parallel to this
straightedge(seeFigure20).Dimension
AshouldbethesameasBandCtoensure
proper alignment of the belts�
Slots in the bed-plate allow for sliding
themotorbackandforthtoadjustbelt
tension�
A B
C
Figure 20 - Top View
Air Compressor
Motor
Flywheel
Straight Edge
Setscrew
Motor Drive
Pulley
MAINTENANCE SCHEDULE
Operation Daily Monthly 3 Months
Check Safety Valve
l
Drain Tank (see Figure 16 or Figure 17)
l
Check Oil Level
l
Clean or Change Air Filter
l
Check Intercooler
l
Clean Unit Components
l
Check Belt Tightness
l
Change Oil (see Figure 14)
l
14
 previous next