Filter
Top Products
Page 12
For technical questions, please call 1-800-444-3353.
SKU 67501/68740
Maintenance And Servicing
Procedures not specically explained in
this manual must be performed only by a
qualied technician.
TO PREVENT SERIOUS
INJURY FROM ACCIDENTAL
OPERATION:
Turn the Power Lever “OFF” and unplug
the Compressor from its electrical outlet
before performing any inspection,
maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM
TOOL FAILURE:
Do not use damaged equipment. If
abnormal noise or vibration occurs, have
the problem corrected before further use.
Cleaning, Maintenance, and
Lubrication
1. BEFORE EACH USE, inspect the general condition
of the Air Compressor. Check for loose hardware,
misalignment or binding of moving parts, cracked
or broken parts, damaged electrical wiring, and any
other condition that may affect its safe operation.
2. AFTER USE, wipe external surfaces of the tool
with a clean cloth.
3. WARNING! If the supply cord of this power
tool is damaged, it must be replaced only by a
qualied service technician.
Maintenance Schedule
Following are general guidelines for maintenance
checks of the Air Compressor.
Note: The environment in which the compressor is used,
and the frequency of use can affect how often you
will need to check the Air Compressor components
and perform maintenance procedures.
Daily:
a. Check oil level.
b. Check for oil leaks.
c. Make sure all nuts and bolts are tight.
d. Drain moisture from air tank.
e. Check for abnormal noise or vibration.
f. Check for air leaks.
*
g. Wipe off any oil or dirt from the compressor.
**
Weekly:
a. Inspect Air Filter (6).
b. Inspect Oil Plug (37).
Monthly:
Inspect Safety Valve (73).
Every 6 months or 100 Operation Hours:
Replace Pump oil.
***
* To check for air leaks, apply soapy water to joints while
the Air Compressor is pressurized. Look for air bubbles.
** To clean the compressor surface, wipe with a damp
cloth, using a mild detergent or mild solvent.
*** Use Air Compressor Oil only (sold separately - SKU
95048).