Filter
Top Products
Page 3
SKU 97510
93910
For technical questions, please call 1-800-444-3353.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving
parts. Protective, electrically nonconductive clothes and nonskid footwear are recom-
mended when working. Wear restrictive hair covering to contain long hair.
7. Wear ANSI-approved impact safety goggles. Wear a NIOSH-approved
dust mask or respirator when working around metal, wood, and chemical
dusts and mists. Other people in the work area must also wear ANSI-approved
impact safety goggles.
8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across
running machines or air hoses.
9. Maintain tools with care. Keep tools clean for better and safer performance. Follow instruc-
tions for lubricating and changing accessories. Inspect tool cords and air hoses periodically
and, if damaged, have them repaired by an authorized technician. The handle must be kept
clean, dry, and free from oil and grease at all times. Do not operate a tool if any portion of the
tool’s operating controls are inoperable, disconnected, altered or not working properly.
10. Disconnect air supply. Disconnect air hose when adding nails, during maintenance, and
when not in use.
11. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are re-
moved from the tool or machine work surface before attaching to an air source.
12. Avoid unintentional starting. Be sure the trigger is in the Off position when not in use and
before plugging in. Do not carry any tool with your nger on the trigger, whether it is attached
to an air source or not. Do not point the tool towards yourself or anyone whether it contains
fasteners or not.
13. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you
are tired.
14. Check for damaged parts. Before using any tool, any part that appears damaged should be
carefully checked to determine that it will operate properly and perform its intended function.
Check for alignment and binding of moving parts; any broken parts or mounting xtures; and
any other condition that may affect proper operation. Any part that is damaged should be prop-
erly repaired or replaced by a qualied technician. Do not use the tool if any the trigger does
not operate properly.
15. Guard against electric shock. Prevent body contact with grounded surfaces such as pipes,
radiators, ranges, and refrigerator enclosures.
16. Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty. Only use accessories intended for use with this
tool.
17. Do not operate tool if under the inuence of alcohol or drugs. Read warning labels if tak-
ing prescription medicine to determine if your judgement or reexes are impaired while taking
drugs. If there is any doubt, do not operate the tool.
18. Use proper size and type extension cord. If an extension cord is required, it must be of the
proper size and type to supply the correct current to the compressor without heating up. Oth-
erwise, the extension cord could melt and catch re, or cause electrical damage to the tool.
Check your air compressor’s manual for the appropriate size cord.