Filter
Top Products
SKU 95173 For technical questions, please call 1-800-444-3353 PAGE 9
TROUBLESHOOTING
Problem Possible Cause Possible Solution
Jaws slipping. Worn or damaged Jaws. Replace Jaws.
Jaws will not open. Loose Nosepiece.
Dirty Jaws.
1.
2.
Tighten Nosepiece.
Clean Jaws.
1.
2.
Stroke is too short. Low oil.
Rivet wrong size.
1.
2.
Prime Riveter.
Use proper rivet length.
1.
2.
Weak pulling action. Low air pressure.
Bad air compressor.
1.
2.
Check regulator.
Have compressor serviced by a qualified
technician.
1.
2.
Leaking air. Poor hose connections.
Bad O-Ring.
Dirty Air Valve.
Dirty air line inlet.
1.
2.
3.
4.
Reconnect using pipe thread sealant tape.
Replace O-Ring.
Clean and lubricate with pneumatic tool oil.
Clean and lubricate with pneumatic tool oil.
1.
2.
3.
4.
PARTS LIST
Part Description
1 Nosepiece (Set of 4)
2
Outer Cylinder
3
Jaw Carrier
4
Jaws
5
Jaw Pusher
6
Jaw Push Spring
7
Jaw Cylinder
8
Case Lock Nut
9
Principle Axis
10
Plastic Ring
11
Handle
12
Lead Axis
13
Plastic Ring
14
Restore Spring
15
Bottle
16
Airproof Lid
17
Silencer
Part Description
18
Lock Nut
19
Air Cylinder
20
Pole Piston
21
Cushion
22
Piston
23
Nut
24
Air Cylinder Lid
25
Trigger
26 Linker
27 Press Plank
28 Air Valve
29 Valve Spring
30 Copper Washer
31 Valve
32 Spring
33 Nut
34 Base Cover
Part Description
35 Air Inlet
B01 O-Ring
B02 O-Ring
B03 O-Ring
B04 O-Ring
B05 O-Ring
B06 Spring Pin
B07 Spring Pin
B08 Pin
B09 Spring Pin
B10 O-Ring
B11 O-Ring
B12 O-Ring
B13 O-Ring
B14 O-Ring