Filter
Top Products
Page 8 of 20 Intimidator™ Spot LED 250 User Manual Rev. 11
Mounting
Before mounting the product, read and follow the Safety Notes.
Orientation
The Intimidator™ Spot LED 250
may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
Rigging
· Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming purposes.
· Make sure that the structure or surface onto which you are mounting the
product
can support the product’s weight. See the Technical Specifications.
· When mounting the
product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
· When rigging the
product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13-mm hole, which is appropriate for
this purpose.
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
· The rubber feet also serve as floor s
upports. When mounting the product on the
floor, make sure that the product and cables are away from people and vehicles.
Mounting Diagram
Bracket
Attachment (x2)
Rubber Feet (x4)
Safety Loop
Attachment Point