Page 11 of 17 Intimidator Scan LED 300 User Manual (Rev. 3)
This fixture has a preprogrammed, sound triggered chase.
Access this via the control panel on the front of the fixture. Please see the chart below for further
explanation.
1. Press <MODE/ESC> until one of the standalone modes appears on the LED screen
(SLAv, NStS, NAFA, NASL).
2. Using <UP> and <DOWN>, select NStS.
3. Press
.
will appear on the screen.
The microphone will only respond to low frequencies (bass).
This fixture has a hidden menu. The purpose of this menu is to adjust the home position
(electronic adjustment) of the attributes listed below.
AIN
Adjustment for the gobo wheel
Adjustment for the gobo wheel rotation
Adjustment for the color wheel
Please see the instructions below to access this hidden menu:
1. Press < MODE/ESC > for at least 10 seconds.
2. Using <UP/DOWN>, enter the following pass code: “2323”. Press <UP> to change the
blinking digit in ascending order, and press <DOWN> to move on to the next digit.
This mode will be automatically terminated after 10 seconds of being idol.
