Chauvet TFX-950CM Work Light User Manual


 
Operating Instructions
TFX-950CM User Manual 10 Revision: 2006-01-20/16:37
Channel Function
1 Red
2 Green
3 Blue
4 Dimmer
Channel
Function
1 Spectrum Color Mix
2 Dimmer
See Color Mix Table in the
appendix section.
Channel
Function
1 Control Mode
2 Red or Dimming
3 Green or Fade
4 Blue or Speed
RGB&D MODE
All three lamps are individually dimmable giving the user
the ability to customize or create the color of choice. This
mode offers the user complete freedom.
1) A steady hold of the MODE button will change the
operating mode once then release the button.
2) Repeat step 1 until you arrive at the RGB&D
operating mode, as indicated by the led next to the
label.
3) The display will now read parameter A: which represents the DMX channel address value. Use
the UP and DOWN buttons to change values.
C&B MODE
This is called the Color and Brightness mode. Use channel
1 to move across the RGB spectrum.
1) A steady hold of the MODE button will change the
operating mode once then release the button.
2) Repeat step 1 until you arrive at the C&B operating
mode, as indicated by the led next to the label.
3) The display will now read parameter A: which
represents the DMX channel address value. Use the UP and DOWN buttons to change values.
RGB & CHASE MODE
This is the most diverse operating mode the Stage Wash
has to offer. It allows individual RGB mix control when
needed while still maintaining the ability to run built in
automated chase programs.
1) A steady hold of the MODE button will change the
operating mode once then release the button.
2) Repeat step 1 until both the RGB&D and the C&B led
turn on.
3) The display will now read parameter A: which represents the DMX channel address value. Use
the UP and DOWN buttons to change values.