Filter
Top Products
Setup
TFX-950CM User Manual 7 Revision: 2006-01-20/16:37
Hanging Clamp
Note!
Clamp is sold separately.
Mounting
ORIENTATION
This fixture may be mounted in any position provided there is adequate room for ventilation.
RIGGING
It is important never to obstruct the fan or vents pathway. Mount the
fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the
fixture by loosening both knobs and tilting the fixture. After finding
the desired position, retighten both knobs.
When selecting installation location, take into consideration lamp
replacement access and routine maintenance.
Safety cables should always be used.
Never mount in places where the fixture will be exposed to rain, high
humidity, extreme temperature changes or restricted ventilation.
DOUBLE BRACKET YOKE (FLOOR STAND)
The TFX-950CM can also be positioned on the floor using its double bracket yoke. This product gets
extremely hot under normal operation and you should take extreme care to avoid any contact what
so ever with the fixture while in use. Be sure to keep all traffic at least 4 feet away from the fixture’s
position.