Filter
Top Products
Operating Instructions
TFX-950CM User Manual 11 Revision: 2006-01-20/16:37
Mode
TFX-32F
TFX-32CON
STAND-BY FUNCTION MODE
TFX- WFS
TFX-SWF Easy Controller (Optional)
The TFX-SWF Foot Controller is used only in master/slave mode. Connect the 8-pin connector of the
foot controller into its respective connector on the first unit in the daisy chain. The table below
describes the functions of the TFX-SWF Controller.
TFX-SWF BUTTONS
Stand By
Mode Function
Blackout
Auto
Led 1: Off
Led 2: Off
Fixtures will run built in programs
automatically
Audio
Led 1: Off
Led 2: On
Fixtures will run built in programs to
the sound.
Manual
Led 1: On
Led 2: Off
Full/CB:
Hold: pedal to set to Full On
Bump: Pedal to set dimming levels
Manual
Led 1: On
Led 2: On
Full/CB:
Hold: pedal to set dimming levels
Release: Pedal to set to Full On
TFX-CONPK Stage Wash™ Controller Pack (Optional)
The TFX-CONPK is a package that includes the TFX-32CON which is an enhanced dedicated
controller for the TFX-950CM, TFX-64CM and TFX-1550CM fixtures. The TFX-32F foot controller is
also included for hands-free operation.
The TFX-32CON provides the following features:
9 different hold-color buttons for
immediate color access
fader access to 40 predefined
mixed colors
fade time control
12 different chase patterns to
choose from
chase speed control
master dimmer level
blackout button
full on button
sound button
The TFX-32F provides the following features:
Selectable modes:
1. Blackout
2. Color Hold
3. Chase
Up and down pedal buttons select
colors and chase patterns
Please refer to the TFX-32CON and TFX-32F user manuals for more in depth information.
TFX-SWF Foot Controller