Filter
Top Products
SKU 90186 PAGE 10
SYMBOLOGY
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Amperes
No Load Revolutions
per Minute (RPM)
n
o
xxxx/min.
A
V ~
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 17
and 18 are included. If any parts are missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
NOTE: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram on page 19.
Always make sure the Power Cord (part #65) of the Circular Saw is
unplugged from its electrical outlet prior to assembly, adding any accessories, or
making any adjustments to the tool.
To Remove/Install A Saw Blade:
1. Depress the Lock Button to hold the Saw Blade (part #3) in place. Continue to
depress the Lock Button. Then, unscrew (clockwise) and remove the Bolt
(part #1) and Outer Blade Press (part #2). (See Figures D and E, next page.)
2. Pull the Lower Guard (part #6) all the way up into the Upper Guard (part #21).
Then, remove the old Saw Blade (part #3) and install a new Saw Blade onto the
Shaft (part #15). NOTE: Make sure to install the new Saw Blade with its
teeth and the arrow on the Saw Blade pointing in the same direction as the
arrow on the Lower Guard. (See Figure F, next page.)
WARNING