Filter
Top Products
Page 2For technical questions, please call 1-800-444-3353.SKU 94056
SAVE THIS MANUAL
You will need the manual for
the safety warnings and precautions,
assembly instructions, operating and
maintenance procedures, parts list and
diagram. Keep your invoice with this
manual. Write the invoice number on the
inside of the front cover. Keep the manual
and invoice in a safe and dry place for
future reference.
SAFETY WARNINGS AND
PRECAUTIONS
WARNING: When using tool, basic
safety precautions should always
be followed to reduce the risk of
personal injury and damage to
equipment.
Read all instructions before using this
tool!
Keep work area clean1. . Cluttered
areas invite injuries.
Observe work area conditions2. . Do
not use machines or power tools in
damp or wet locations. Don’t expose
to rain. Keep work area well lighted.
Do not use electrically powered tools
in the presence of ammable gases
or liquids.
Keep children away3. . Children must
never be allowed in the work area.
Do not let them handle machines,
tools, or extension cords.
Store idle equipment4. . When not
in use, tools must be stored in a dry
location to inhibit rust. Always lock
up tools and keep out of reach of
children.
Do not force tool5. . It will do the job
better and more safely at the rate
REV 06l
SPECIFICATIONS
Welding Current
.8 mm wire on 16 ga.
sheet steel
104.3/95.5 A
(Max/Min Setting)
.8 mm wire on 1/4”
steel plate
103.7/103.1 A
(Max/Min Setting)
Duty Cycle
10% @ 90 Amps (Max Setting) or
10% @ 80 Amps (Min Setting, actual 11%)
Power Consumption 120 V~, 24 A
Ground Cable 4 AWG, single insulation, 6’
Torch Power Cable 8 AWG, single insulation, 6’
Thermal Overload
Both settings:
10 min. shutdown, 3 min. back on with Light
Welder Tip
0.030”; Spare: Welder Tip 0.035”;
Will also accept a 0.023” welder tip (not included)
Wire Size 0.030” ux core wire (using 0.030” Welder Tip)
Wire Spool Size 4” diameter
Overall Dimensions 14-1/2” (L) x 7-7/8” (W) x 15-1/2” (H)
Weight 34.45 lb.
Accessories Spare Welder Tip (0.035”)
Note: Performance of this tool may vary depending on variations in local line voltage.
Extension cord usage may also affect tool performance.