Filter
Top Products
Page 3For technical questions, please call 1-800-444-3353.SKU 94056
for which it was intended. Do not
use inappropriate attachments in an
attempt to exceed the tool capacity.
Use the right tool for the job6. . Do
not attempt to force a small tool or
attachment to do the work of a larger
industrial tool. There are certain
applications for which this tool was
designed. Do not modify this tool and
do not use this tool for a purpose for
which it was not intended.
Dress properly7. . Do not wear loose
clothing or jewelry as they can be
caught in moving parts. Protective,
electrically nonconductive clothes and
nonskid footwear are recommended
when working. Wear restrictive hair
covering to contain long hair.
Use eye and ear protection8. . Always
wear ANSI-approved, arc-shaded,
impact safety face shield. Always use
the full face shield when welding.
Wear a NIOSH-approved dust mask
or respirator when working around
metal, chemical dusts, fumes and
mists.
Do not overreach9. . Keep proper
footing and balance at all times. Do
not reach over or across running
machines.
Maintain tools with care10. . Keep
tools sharp and clean for better
and safer performance. Follow
instructions for lubricating and
changing accessories. Inspect tool
cords periodically and, if damaged,
have them repaired by an authorized
technician. The handles must be
kept clean, dry, and free from oil and
grease at all times.
Disconnect power11. . Unplug tool
when not in use.
Remove adjusting keys and 12.
wrenches. Check that keys and
adjusting wrenches are removed
from the tool or machine work surface
before plugging it in.
Avoid unintentional starting13. . Be
sure the switch is in the Off position
when not in use and before plugging
in. Do not carry any tool with your
nger on the trigger, whether it is
plugged in or not.
Stay alert14. . Watch what you are
doing, use common sense. Do not
operate any tool when you are tired.
Check for damaged parts15. . Before
using any tool, any part that appears
damaged should be carefully checked
to determine that it will operate
properly and perform its intended
function. Check for alignment and
binding of moving parts; any broken
parts or mounting xtures; and any
other condition that may affect proper
operation. Any part that is damaged
should be properly repaired or
replaced by a qualied technician. Do
not use the tool if any switch does not
turn On and Off properly.
Guard against electric shock16. .
Prevent body contact with grounded
surfaces such as pipes, radiators,
ranges, and refrigerator enclosures.
Replacement parts and 17.
accessories. When servicing, use
only identical replacement parts.
Use of any other parts will void the
warranty. Only use accessories
intended for use with this tool.
REV 06g