Filter
Top Products
English
Page 11
SKU 94245 For technical questions, please call 1-800-444-3353
Prepare Material Before Cutting
1. Support large panels to minimize risk of blade pinching and saw kickback.
2. Use the supplied Guide Fence (1) when ripping material by sliding it into the Base
Plate (4), and tightening Screw (3).
3. Securely clamp material to be cut to work bench.
4. Be cautious that Circular Saw does not cut into supports or workbench.
5. Use the appropriate type of blade for the material you are cutting.
General Cutting
Caution: Verify that Saw Blade (14) is securely tightened and both angle and height
adjusting nuts and levers are tight. Read and understand all safety precautions listed
on page 5.
1. If a straight cut is desired, slide the Guide Fence (1) into the side of the Circular Saw
and tighten with Screw (3), or clamp a straight edge to the material to guide the saw on
a straight path. Refer to photo above.
Screw (3)
Guide Fence (1)
Scale