Filter
Top Products
English
Page 14
SKU 94245 For technical questions, please call 1-800-444-3353
7. Place the new Saw Blade over the Spindle (16) hole.
The Saw Blade teeth at the bottom of the saw blade should be pointing toward the
back of the Circular Saw.
8. Place the Blade Pressure Plate (12) over the Spindle hole, then insert the Hex Screw
(42).
9. Press the Spindle Lock Button with one hand, and tighten the Blade Screw
(clockwise) using the Hex Wrench with the other hand.
TROUBLESHOOTING
motpmySesuaCelbissoPydemeR
nehwtratstonseodwaS
.dellupsireggirt
.drocenilotrewopoN.1 .rewoprofteltuolacirtc
elekcehC.1
nidehsuptonnottuBkcoLhctiwS.2
.reggirtgnillupelihw
gnillupelihwnottubnisserP.2
.reggirt
.hctiws
evitcefeD.3.hctiwsecalpeR.3
nrowroytridsehsurbnobraC.4
.nwod
.sehsurbnobracecalperronaelC.4
.nwodswolswas,
gnittucelihW.nwodnrowroytridsehsurbnobraC.sehsurbnobracecalperronaelC
.gnittucelihwspilsedalbwaS.esool)24
(wercSxeH)24(wercSxeHnethgityleruceS
roskcits)02(drauGedalB
.ylisaenepotonseod
revoCedalBehtnipudliubsirb
eD
.)11(
tuonaelcdnaedalBwaSevomeR
.)11(revoCedalB
elihwsekomsrosnrubdooW
.tucgnieb
.lludedalBwaS.edalBwaSec
alperroneprahS
Hex Screw (42)
Blade Pressure Plate (12)
Blade Guard (20)
Blade Cover (11)