Filter
Top Products
SKU 95380 For technical questions, please call 1-800-444-3353 PAGE 14
TROUBLESHOOTING
Problem Possible Solution
Router will not run. 1. Make sure the Power Switch of the Router Table is in its “ON” position.
2. Make sure the Power Switch of the Router is in its “ON” position.
3. Make sure the Power Cord of the Router is
connected to the Power Table’s Outlet.
4. Make sure the Power Cord of the Router Table is connected
to a working, 110 volt, grounded, electrical outlet.
5. Check the Power Cords of the Router and Router Table for damage.
6. Carbon brushes need replacing.
7. Have a qualied service technician check the
Router and Router Table for defects.
Excessive vibration
when Router is on.
1. Make sure the Router is properly and rmly attached to the Router Table.
2. Make sure the Bit in the Router is sharp and properly
installed. Make sure Bit is not bent or damaged.
3. Have a qualied service technician check the
Router and Router Table for defects.
The Power Switch
of the Router and/
or Router Table does
not turn off the tool.
Immediately unplug the Router Table’s Power Cord from its
electrical outlet. Discontinue using tool until a qualied service
technician checks the Router and Router Table for defects.