Filter
Top Products
SKU 95380 For technical questions, please call 1-800-444-3353 PAGE 4
7. Use safety equipment. Always wear ANSI-approved safety impact
eye goggles. Dust mask or respirator, and hearing protection must be
used for appropriate conditions.
TOOL USE AND CARE
1. Do not force the Router. Use the correct tool for your application. The
correct tool will do the job better and safer at the rate for which it is designed.
2. Do not use the Router if the Power Switch does not turn
it on or off. Any tool that cannot be controlled with the
Power Switch is dangerous and must be replaced.
3. Disconnect the Power Cord Plug from the power source before making
any adjustments, changing accessories, or storing the Router. Such
preventive safety measures reduce the risk of starting the tool accidentally.
4. Store idle tools and equipment out of reach of children and other untrained
persons. Tools and equipment are dangerous in the hands of untrained users.
5. Maintain this product with care. Keep the Router and its Table clean
and in proper working order. Properly maintained tools and equipment
are easier to control. Do not use damaged tools and equipment. Tag
damaged tools and equipment “Do not use” until repaired.
6. Check for misalignment or binding of moving parts, breakage
of parts, and any other condition that may affect the Router’s
operation. If damaged, have the tool serviced before using.
Many accidents are caused by poorly maintained tools.
7. Use only accessories that are recommended by the manufacturer
for your model. Accessories that may be suitable for one product
may become hazardous when used on another product.
SERVICE
1. Tool service must be performed only by qualied repair personnel. Service
or maintenance performed by unqualied personnel could result in a risk of injury.
2. When servicing a tool, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning”
section of this manual. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of electric shock or injury.