Filter
Top Products
SKU 95380 For technical questions, please call 1-800-444-3353 PAGE 2
SPECIFICATIONS
Motor 110 VAC / 60 Hz / 11 A / 1-3/4 HP / 20,000 Maximum RPM
Router Type Plunge Router with Brake
Router Power Cord SJT 16 AWG x 2C
Router Table Power Switch Rocker (ON/OFF) with Safety Key
Router Table Power Cord 16 AWG 3C
Router Table Power Plug 3-Prong / Grounded
Router Collet Sizes 1/2” with 3/8” & 1/4” Adapters
Router Depth Scale 1” to 3” in 1/16” Increments
Miter Gauge Dimensions 5-1/2” Long x 3” Wide x 1-1/2” High
Miter Gauge Capacity 0° to 60° (Left & Right)
Table Dust Port Dimensions 1-3/8” Outside Diameter
Table Top Dimensions 14-3/8” Long x 23-3/4” Wide x 3/4” Thick
Overall Dimensions 14-13/16” Long x 23-3/4” Wide x 15-3/4” High
Additional Features 19 Gauge Steel Legs / Clear Plastic Guard
Weight 20 Pounds
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions,
assembly, operating, inspection, maintenance and cleaning procedures,
parts list and assembly diagram. Keep your invoice with this manual.
Write the invoice number on the inside of the front cover. Keep this
manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING! Read all instructions
Failure to follow all instructions listed below may result in electric shock,
re, and/or serious injury. The term “power tool” in all of the warnings listed
below refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
2. Do not operate the Router in explosive atmospheres, such as
in the presence of ammable liquids, gases, or dust. Power
equipment creates sparks which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating power
equipment. Distractions can cause you to lose control. Protect others in
the work area from debris such as chips and sparks. Provide barriers or
shields as needed. Children and visitors should never be in the work area.
227847