Filter
Top Products
Page 12 For technical questions, please call 1-800-444-3353. SKU 96035
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
Work Piece and Work Area Set Up
Designate a work area that is clean and 1.
access by children or pets to prevent
distraction and injury.
Route the power cord along a safe 2.
route to reach the work area without
creating a tripping hazard or exposing
the power cord to possible damage. The
power cord must reach the work area
with enough extra length to allow free
movement while working.
Secure loose work pieces using a vise 3.
or clamps (not included) to prevent
movement while working.
There must not be objects, such as utility 4.
lines, nearby that will present a hazard
while working.
General Operation
TO PREVENT
SERIOUS INJURY:
Wear ANSI-approved safety
goggles, ear protection, steel-toe
boots, and dust mask during use.
Keep feet clear of Breaker
Hammer.
Keep children and animals well
clear of the work area.
USE THIS TOOL ONLY WITH A 20
AMP CIRCUIT BREAKER.
This Breaker Hammer may have
decreased performance for a brief period
This happens because the grease inside the
tool may be somewhat thick, preventing the
the motor is cold. This is perfectly normal
and does not indicate a problem. To help
reduce this effect, we recommend storing this
60° F.
Only use sharp tipped chisels.
Dull tipped chisels can cause unneces-
sary chisel movement, resulting in tool
wear and possible injury.
Figure 3
Before each use, check the Chisel for
dullness, cracks or other damage:
Never use a dull or damaged Chisel.
See Figure 3.