Filter
Top Products
Page 9For technical questions, please call 1-800-444-3353.SKU 96035
INSTRUCTIONS FOR PUTTING
INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Release the Trigger and unplug
the tool from its electrical outlet
before assembling or making any
adjustments to the tool.
Note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
Assembly
The only assembly required for the
Handle (92) to the side of the Gear Box (23)
and the Spline Axle (27).
Gear
Box (23)
Spline
Axle (27)
Handle
(92)
Figure A
1.
Axle so that the end of the Spline Axle
Handle. See Figure A.
Handle
(92)
Figure B
Right
Handle
(89)
2. With your other hand, hold and slightly
twist Right Handle (89) while slowly
snug into place. See Figure B.
Figure C
Nut (91)
Handle
(92)
Spline Axle (27)
3. Thread Nut (91) over tip of Spline Axle.
Use Wrench (not included) to fasten
Periodically, check Nut for tightness.
See Figure C.
REV 10e