Filter
Top Products
Page 4 For technical questions, please call 1-800-444-3353. SKU 96035
Maintain power tools. Check for e.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean.f.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
Use the power tool, accessories g.
and tool Chisels etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
Service5.
Have your power tool serviced by a a.
qualied repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
Breaker Hammer Safety Warnings
Wear ear protectors.1. Exposure to noise
can cause hearing loss.
Use auxiliary handles supplied with 2.
the tool. Loss of control can cause
personal injury.
Hold power tools by insulated 3.
gripping surfaces when performing
an operation where the cutting tool
may contact hidden wiring or its own
cord. Contact with a ″live″ wire will make
exposed metal parts of the tool ″live″ and
shock the operator.
Do not operate this tool if you have back, 4.
neck, or wrist injuries, or other conditions
that will be aggravated by the severe
jerking forces that this tool exerts upon
the operator.
Maintain labels and nameplates on
5.
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare to 6.
begin work before turning on the tool.
Do not lay the tool down until it has come 7.
to a complete stop. Moving parts can
grab the surface and pull the tool out of
your control.
When using a handheld power tool,
8.
hands to resist starting torque.
Do not leave the tool unattended when 9.
it is plugged into an electrical outlet.
Turn off the tool, and unplug it from its
electrical outlet before leaving.
This product is not a toy. Keep it out of 10.
reach of children.
People with pacemakers should 11.
consult their physician(s) before use.
to heart pacemaker could cause
pacemaker interference or pacemaker
failure. In addition, people with
pacemakers should:
electrical shock.
grounded. Ground Fault Circuit
Interrupter (GFCI) should also be
implemented – it prevents sustained
electrical shock.
WARNING: Some dust created by power 12.
sanding, sawing, grinding, drilling, and
other construction activities, contains