Filter
Top Products
Page 10SKU 96448 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Charger Input 120 V~, 60 Hz, 1.8 A
Charger Output 7.2 - 24 V, 1.5 A
Charge Time 1-3/4 - 2 Hours.
Speed 0-2300 RPM
Maximum Torque 220 ft-lb
Battery Cell Type NiCd, 1700 mAh, 1.2 V, Item 96756
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
List of contents
Description Qty
Impact Wrench 1
Charger 1
Battery 1
Replacement Carbon Brush 4
SET UP INSTRUCTIONS
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
Risk of accidental starting; resulting in serious personal
injury. Turn the Forward/Reverse Switch to the center, locked
position and unplug the battery from the Impact Wrench
before making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
Tool Features
Always make sure the Trigger (36) of the Impact Wrench is not depressed, the 1.
Forward/Reverse Switch (32) is in the center, locked position, the Battery (37)
is removed from the Impact Wrench, and the Charger (39) is unplugged from an
electrical outlet prior to making any adjustments to the tool.
WARNING
REV 07l