Filter
Top Products
Page 14SKU 96448 For technical questions, please call 1-800-444-3353.
When installing the Carbon Brushes, make sure the carbon portion of the Carbon 4.
Brushes contact the Motor’s Rotor and that the springs face away from the Motor.
Also, make sure the springs operate freely.
After replacement or cleaning, replace the two Brush Holder Caps.5.
NOTE: New Carbon Brushes tend to arc or spark until they wear and conform to the
Motor’s Rotor.
Troubleshooting
Problem Possible Causes Possible Solutions
Trigger Switch locked in
place.
Forward/Reverse Switch is in 1.
center position.
Move button to the left or right for 1.
forward or reverse operation.
Impact Wrench operates
slowly or without force.
Battery weak.1. Recharge Battery completely.1.
Impact Wrench does not
turn on.
Battery completely discharged.1. Recharge Battery completely.1.
Battery will not hold
charge.
Battery dead.1. Replace with new Battery.1.