Filter
Top Products
User’s Manual
December 2005 Page 25
Specifications and Parts
This section lists the specifications of your SD25 Series screwdrivers under typical operating
conditions and available screwdriver-to-controller cables.
Specifications
This section lists general specifications, torque and RPM ranges, and length and weight ranges for
SD25 Series screwdrivers.
General Specifications for SD25 Series Screwdrivers
Description Specifications
Motor current 8A peak
Motor commutation Hall-based, brushless DC motor
Screwdriver logic power 24 VDC
Screwdriver pushbuttons* Start, direction, auxiliary, push-to-start
Screwdriver connector High density 26-pin connector
Screwdriver Display Three indicator / status LEDs for torque/angle
Screwdriver Headlights Turn on when screwdriver is running in forward or reverse
Ambient operating temperature 0✘ to 60✘ C (32✘ to 140✘ F)
Relative humidity 0 to 85% R.H. (non-condensing)
* Not available on fixtured screwdrivers
Torque, RPM, Length and Weight Ranges of SD25 Series Screwdrivers
Torque Range
Screwdriver
Type
Nm lbf-in ozf-in kgfcm
RPM Range Length Range Weight Range
In-line 1.1 10 160 11.5 1700 9.4 in / 239 mm 0.91 lb / 0.41 kg
In-line 3.3 20 320 23.0 1100 9.4 in / 239 mm 0.91 lb / 0.41 kg
In-line 3.9 35 560 40.3 800 9.4 in / 239 mm 0.91 lb / 0.41 kg
In-line 5.6 50 800 57.6 500 9.6 in / 244 mm 1.1 lb / 0.49 kg