Filter
Top Products
10
The brackets for Cisco 2691 routers are shown in Figure 1.
Note The slots in the brackets marked RIGHT are for securing cables with cable ties.
Figure 1 Brackets for Rack-Mounting of Cisco 2691 Routers
Attaching Brackets
Attach the mounting brackets to the chassis as shown in Figure 2, Figure 3, Figure 4, or Figure 5, using the screws provided in
the bracket kit. Use a number 2 Phillips screwdriver to install the bracket screws.
Caution Your chassis installation must allow unrestricted airflow for chassis cooling. For mounting in a 19-inch rack, be
sure to install the wide bracket (marked RIGHT) on the side where the cooling fans are located. For installation on
a desktop, keep at least 1 inch of clear space beside the cooling fans.
Figure 2 Bracket Installation for Center Mounting with Front Panel Forward
88810
23" ETSI, NEBS
LEFT
For chassis side
opposite fans
For chassis side
with fans
23" ETSI, NEBS
RIGHT
LEFT
RIGHT
Slots for cable tie attachment Slots for cable tie attachment
Narrow bracket for
chassis side opposite fans
Wide bracket for
chassis side with fans
Bracket pair for 19-inch rack Bracket pair for 23-inch rack
23" ETSI, NEBS
LEFT
LEFT
Left bracket
for 23-inch rack
82689
S
E
R
IE
S
S
E
R
IE
S
Right (wide) bracket
for 19-inch rack
RIGHT
23" ETSI, NEBS
RIGHT
Right bracket
for 23-inch rack
Left (narrow) bracket
for 19-inch rack
Use two screws on each side.