Cisco Systems 901 Router User Manual


 
CHAPTER
1-1
Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide
OL-23778-01
1
Introduction
The Cisco ASR 901 Mobile Wireless Router is a cell site gateway platform specifically designed to
provide transport for both legacy TDM and Ethernet traffic over a single converged network. The
Cisco
ASR 901 router is used at the cell site as a part of a 2G, 3G, or 4G radio access network (RAN)
traffic.
This chapter includes the following sections:
Hardware Description, page 1-1
Power Supply, page 1-5
System Specifications, page 1-7
Router Interface Numbering, page 1-7
Regulatory Compliance, page 1-8
Hardware Description
Contained in a standard shelf-rack enclosure, the Cisco ASR 901 router weighs approximately 10
pounds (4 kg). It measures 1.7 inches high x 17.4 inches wide x 8.25 inches deep (4.32 cm or 1RU x 44.2
cm x 21.0
cm). These dimensions do not include the rack-mount brackets.
You can mount the router in a standard (ETSI) 19-inch (48.3 cm) equipment rack or 600mm ETSI rack
or a 23" ETSI rack.
The Cisco ASR 901 router includes the following hardware features:
16 T1/E1 RJ45 ports
Four ports of 100/1000 Copper Ethernet including auto-MDIX (RJ45 connector)
Four ports of SFP only
Four combo ports (SFP/Copper)
Dual feed supply with redundant DC inputs plus built in redundant power supply (RPS)
Two fans placed in the chassis (fans are redundant)
Chassis: 1RU, 8.25 inch depth
Operating temperature range is -40 to +149°F (-40°C to +65°C).
Side to side airflow
Four solid state alarm inputs
A single built-in 1GB Meninx Flash memory