Filter
Top Products
CHAPTER
3-1
Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide
OL-23778-01
3
Installing the Cisco ASR 901 Mobile Wireless
Router
This chapter describes how to install the Cisco ASR 901 router, and how to connect it to networks and
external devices. These are the following sections:
• Network Modules, page 3-1
• Mounting the Cisco ASR 901 Router, page 3-2
• Connecting the Chassis Ground and Power, page 3-5
• Installing and Removing SFP Modules, page 3-9
• Connecting Cables, page 3-11
• Powering On the Router, page 3-15
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Network Modules
You can order the Cisco ASR 901 router with the following interface modules.
• T1/E1 interface module
• SFP Ethernet interface module
• RJ-45 Ethernet interface module
Interface modules are installed and shipped with the router; they are not field replaceable.