12
Remote Control
To use the remote, point it at the remote sensor of the player. Operate the remote within 15
feet of the sensor and at an angle of +/- 60 degrees.
Replace the battery if the remote control does not work.
Remove the battery from the remote if it will not be used for a long period of time.
•
•
•
GETTING STARTED
AC Adapter
To wall outlet
Power Supply
Using the AC/DC Adapter
This AC/DC adapter should be used with 100-240V 50/60Hz AC wall
outlets.
DC Out: 12V
DC Current: 4.0A maximum
Caution:
Do not connect the power plug to a power outlet other than that which
is indicated here and on the label as this may result in the risk of re or
electric shock.
Do not handle the power plug with wet hands. Doing
so may cause electric shock.
Only use AC adapters of the type specied here. Failure
to do so may case a re or damage the player.
•
•
•
•
•
Battery Operation (DC)
This unit can be powered by 8 x “D”
batteries. To install the batteries:
Remove the battery compartment
cover by pushing it in the direction
of the arrow.
Insert 8 “D” batteries, taking care
to match the polarities (+ / -) with
the markings in the battery compart-
ment.
Replace the cover.
(The unit can function on AC power with
the batteries installed.)
WARNING
The batteries used in this device may present a re or chemical burn if mistreated. Do not
recharge, disassemble, incinerate, or heat the battery (~212
○
F).
Keep batteries away from children.
1.
2.
3.
•
•