Filter
Top Products
Chapter 2 Let’s Get Going - Hardware Setup
11
Connect the power adapter supplied in the IEEE802.3af PoE kit to the main
electrical supply and the power plug into the socket of the injector.
Note:
The voltage and current supplied to the NetPassage WP18 power adapter and
the standard PoE kit power adapter are different. Do not interchange the
power adapters.
Now, turn on your power supply. Notice that the Power and Port 4 (PoE Port)
(according to the picture illustration) LEDs have lighted up. This indicates that
the WP18 is receiving power through the PoE Injector and that connection
between NetPassage WP18 and your PC has been established.
PC