Filter
Top Products
Chapter 2 Let’s Get Going - Hardware Setup
3
2: Let’s Get Going-Hardware Setup
Compex WP18 can be powered using either the power adapter or the
Compex PoE or IEEE802.3af PoE. The installation process for the three options is
described below.
Option One: Using power adapter to supply power to the
unit
Before attaching a pair of external
antennas to Compex WP18 correctly,
please carefully take note of the “A”
marking on one of these two
antennas as the Dual-band “AG”
Antenna.
No “A” marking means that the other
antenna is Single-band “G” Antenna.
Connect this dual-band
“AG” to the LEFT on
Compex WP18.
Connect this single-band
“G” to the RIGHT on
Compex WP18.
“A” marking
!
Important to Note: To ensure that Compex WP18 is
working well, these two antennas MUST NOT be
swapped.