Filter
Top Products
10
DESCRIPTION
Your planer has a precision-built electric motor and it should be connected to a 120-volt,
60-Hz AC ONLY power supply (normal household current). DO NOT operate on direct
current (DC). The large voltage drop will cause a loss of power and the motor will overheat.
If the planer does not operate when plugged into correct 120-volt, 60-Hz AC ONLY outlet,
check the power supply. This planer has a 10-ft., 2-wire power cord (no adapter needed).
KNOW YOUR PLANER
NOTE: Before attempting to use your planer, familiarize yourself with all of the
operating features and safety requirements.
This Professional Planer has the following features:
1. Powerful, heavy-duty 7-Amp motor provides high speed needed for fast, clean cuts
in most any type of wood. Precision balanced for smooth, quiet operation.
2. Low profile depth-of-cut control knob allows easy depth-of-cut adjustments from
0 to 1/8-in.
3. Grooved front shoe design for 45° bevel or chamfer cuts.
4. Ergonomically designed contoured top-mount handle and front assist handle
with soft grips for positive gripping, balance, control and comfort.
5. Heavy-duty extended length trigger switch conveniently located for comfort and
control. Lock-off button helps prevent accidental starts.
6. 3
1
/4-inch cutting width for fast planing. Planes wide side of 2 X 4 board in one pass.
7. Uses reversible, double-edged hardened steel carbide-tipped blades that can be
used on both sides for longer blade life.
8. Includes edge guide for accurate, precise cuts on long or uneven workpieces.
9. Includes rabbet guide for making 15/16-in. deep rabbet cuts.
10. Chip chute keeps work surface clean and directs wood chips away from operator.
11. Permanently lubricated bearings for smooth, efficient operation and long life.
12. Cogged timing belt drive provides positive, precise power transmission.
13. High-impact plastic motor housing and handles help protect tool from damage and
reduce weight.
14. Includes high-impact resistant storage / carrying case.
11
DESCRIPTION cont.
This Professional Planer has the following features:
Fig. 1
Depth Adjustment
Knob
Left or Right
Dust/ Chip
Extraction
Trigger Switch
PRODUCT SPECIFICATIONS
Input
Cutting Width
Cutting Depth
Max. Rabbet Cut
Rating
No-Load Speed
7 Amps
3 1/4 in.
0 to 1/8-in.
15/16-in.
120 volts, 60 Hz AC
12,000 RPM
Rear Handle
Front
Handle
On/Off
Button
0
1/64
1/32
3/64
Base plate stand