Filter
Top Products
SWITCH
See Figure2.
Toturnyour screwdriverON, depress switchtriggerin
the directionofthe arrow in figure2. Toturn it OFF,
release the switchtrigger.
TRIGGER Fig, 2
TWO SPEED SWITCH
See Figure 3.
Your screwdriverhas been designed fortwo speed
driving.A slide switchis located ontop of your
screwdriver toselect either HI or LO speed. When
usingscrewdriverin the HI speed setting,speed will
increaseand unitwill have lesspower and torque.
When using screwdriver inthe LO speedsetting,
speed will decrease and unitwill have more power
and torque. Use HI speed forfast screwdriving
applicationsand LO speedfor high powerand torque
applications.
TWO SPEED (HI-LO SWITCH)
HIGH
LOW
Fig. 3
SWITCH LOCK
See Figure 4.
The switch triggercan be lockedin the OFF position.
This feature can be used to prevent the possibilityof
accidental startingwhen not in use. Tolock switch
trigger,place theforward/reverse switch in center
position.
FORWARD (F)
REVERSE (R)
SWITCH
REVERSE (R)
FORWARD
WARNING: Batterytootsare atwaysin
operatingcondition.Therefore, switchshould
always be lockedwhen not in use or carryingat
yourside.
REVERSIBLE
See Figure 4.
Your screwdriveris equippedwith a Forward/Reverse
Switch whichallowsyou to change the directionof
rotationof thebit. For drivingor forwardrotation,slide
(F) position,To reverse the
bitdirection, slide the switchto the reverse(R)
position.
CAUTION: Toprevent gear damage, always
allow bitto come to a complete stop before
changingthe directionof bit rotation.
Tostop your screwdriver,release switchtriggerand
arrowyour screwdriverto come to a completestop.
_1= WARNING: Always wear safety gegg_esor
safety glasseswith side shieldswhen operating
tools. Failureto doso couldresultin objects
being thrown intoyour eyes, resultingin possible
seriousinjury.
8