Craftsman 315.114071 Work Light User Manual


 
_WARNING: Read and understand all instructions.
Failure to follow all instrustlons listed below,can
result in electric shook, fire and/or sedous personal
injury.
SAVETHESEINSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered
benches and dark areas Invite accidents,
ELECTRICAL SAFETY
Do not abuse the cord. Never use the cord to carry
the charger. Keep cord away from heat, off, sharp
edges, or moving pads. Replace damaged cords
immediately. Damaged cordsmay create a fire.
A battery operated tool with Integral batteries or a
separate batteP/pack must he recharged only with
the specified charger for the battery. Achargerthat
may be suitable for one type of batterymay cre_e a
riskoffire when used with another battery.Usebattery
only with charger listed.
Use battery operated tool only with specifically
designated battery pack, Use of any other batteries
may create a riskoffire. Use onlywith battery pack
listed.
PERSONAL SAFETY
Stay aled, watch what you am doing and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of Inatten-
tionwhile operatingpowertoolsmay result in serious
personal Injury.
Do not overreach. Keep proper footing and bal-
ance at all times. Properfooting and balanceenable
bettercontrolofthe toolin unexpectedsituations.Do
not useon a ladderor unstablesupport.
TOOLUSEANDCARE
Disconnect battery pack from tool before making
any adjustments, changing accessories, orstoring
the tool. Such preventivesafety measures reducerisk
of starting the toolacoldentaity.
Store Idle tools out of reach of children and other
untrained persons. Toolsare dangerous in the hands
of untrainedusers.
Check for mlsallgnment or binding of moving
pads, breakage of parts, and any other condition
that may affect the tool's operation, ff damaged,
have the tool serviced before using. Many accidents
are caused bypoorlymaintained tools.
Use only ecceseodes that are recommended by
the manufacturer for your model. Accessoriesthat
may be suitablefor onetool, may createa riskof injury
when used on another tool.
SERVICE
Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualifiedpersonnel couldresultin a riskof Injury.
When servicing atool, use only Identical replace-
ment pads. Follow Instrectlons Inthe Maintenance
sentlon of this manual. Use of unauthorizedpartsor
failuretofollowMaintenance Instrustlonsmay createa
riskof shookor Injury.