Filter
Top Products
UNPACKING
Thisproducthasbeenshippedcompletelyassembled.
• Carefullyremovethe too[ and anyaccessories from the
box. Make surethat a_litemslisted in the packing mist
are inc)uded.
• Inspectthe too[ carefullyto make sure no breakageor
damage occurred duringshipping.
• Do not discardthe packingmateris[untilyou have
carefullyinspected and satisfactorilyoperated thetool.
• If anypartsare damaged or missing, please call
1-800-932-3488 for assistance.
PACKING LIST
Sander
Dust Bag
Paper Punch
Sandpaper(1)
Operator'sManual
_k WARNING" Ifany partsare missingdo notoperate
thLstool untilthe missing partsarerepracsd, Failure
to do so couldresult inpossiblessr[ous persosai
injury.
_ WARNING: Do notattempt to modify this tool
or create accessoriesnot recommended for use
with thistool. Any suchatterat(on or modification Ls
misuseend couldresult ine hazardouscondition
feadiogto possibleseriouspersona[In}ury.
A WARN|NG: Do not connect topower supplyuntil
assembly is complete, Failureto complycould result
inaccidentalstartingand possibleseriousinjury.
_k WARN|NG: Do not allow familisrity with tools
to make you careless. Rememberthat a careless
fraction of a second is sufficientto inflictserious
injury.
_L WARNING: Alwayswearsafety gogglesor safety
glasseswith side shieldswhen operating power
tools,Failureto do so could rseultin objectsbeing
throwninto youreyes resultinginpossibleserious
injury.
INSTALLING SANDPAPER
The cushionon the sander givesyou the optionof using
either non-adhesivesandpaperthat clamps to the platen
or adhesive backed sandpaper with pressuresensitive
adhesive backingthat sticksto the cushion.
INSTALLING NON-ADHESIVE SANDPAPER
See Figure2.
• Unplug the sander.
• inspectsandpaper beforeinstalling.Do not use if bro-
ken or defsc_ve.
• If rap{acingsandpaper, removeoldsandpaper. To
removepaper, release paper clamp by lifting up on
leverand disengagingit fromthe tab onthe platen.
• Insertend ofnew 1/4sheet sandpaper approximately
(1/2 inch) underthe paper clamp.
• Lift up on paper clamp (everand lock intop(ace.Apply
downwardpressureto conformsandpaper to p(atan.
• Wrap sandpaper aroundcushion.Lift lever on opposite
end of sanderand insertlooseend ofsandpaper under
the paper clamp.Fit sandpaper againstcushionas
fight as possible.
• Liftup on paperclampleverand lock _ntoplace.
CUSHION
NON-ADHESIVE
SANDPAPER
PAPER
CLAMP Fig. 2
LEVER