Filter
Top Products
I CRAFTSMAN°I
CHEST TOP WITHOUT TASK LIGHT
Tools Required:
Screwdriver, Crosstip
Chest top removal
• Disconnect power from unit.
• Remove pull out work surface. (See
drawer installation and removal.)
• Remove enough drawers to reach the
top back inside of the unit. (See
Drawer installation and removal.)
• Remove lock retaining clip. Pull lock
out to remove.
• Remove (4) screws holding top in
place.
• Remove top from unit.
Chest top installation
• Position top on unit. Attach using (4)
screws.
• Position lock in unit. Install retaining
clip to hold lock in place.
• Make sure the back of the lock rod is
inserted into the lock rod holder in the
back of the unit.
• Push the lock rod toward the back of
unit the and line up with lock. Insert
the lock rod into the back of the lock.
• Test lock operation.
• Reinstall drawers.
• Reconnect power to the unit.
Lock
DRAWERINSTALLATION AND
REMOVAL
• Empty the drawer.
• Fully extend the drawer.
Release
Lever Style - Lift or
lower (depending on the
slide) the release lever
on both sides, (this
allows the slides to ride
over the stops.) Pull out
to remove.
Tab Style - Depress the
release tabs on both
sides, (this allows the
slides to ride over the
stops.) Pull out to
remove.
• To reinstall, carefully align the slides
and push the drawer into the unit until
the drawer stops.
Lock
holder Lock rod
Lock
retaining
clip
Remove
screws
Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA
F1616 2