Filter
Top Products
SPECIFIC SAFETY INSTRUCTIONS
FOR THIS NAILER
DO NOT AIM NAILER OR SHOOT
NAILS AT A PERSON OR ANIMAL.
Released nails can cause severe injuries.
1. USE ONLYTHE NAILS INDICATED
in this manual. Use of accessories
that are not designed for this tool
could result in personal injury and/or
damage to the tool.
2. DO NOT TOUCH metal parts of tool
during operation. Hold only plastic
handle or housing.
3. KEEP tacking speed at one nail
per second.
4. NAILER should be used only for
the purposes outlined in this manual.
It is designed for use on wood,
Do not use on hard surfaces like
rock, concrete, etc. personal injury
or damage to the tool could result.
5. When nailing thin wood, special
caution must be taken for
possible penetration of nails
through the wood.
6. When using this tool in high
locations, ,_LWAYS make sure there
is no one below that could be
injured. ALWAYS be sure you have
a firm footing when using this tool.
7. ALWAYS hold tool firmly.
8. NEVER connect tool to a DC
power source.
9. REGULAR CLEANING, inspection
and maintenance is necessary.
10.DURING OPERATION, the nailer
may feel warm to the touch. This is
normal. However, if the nailer starts
to feel hot, discontinue use until the
unit cools down,
GROUNDING INSTRUCTIONS
IN THE EVENT OF A MALFUNCTION
OR BREAKDOWN, grounding provides
a path of least resistance for electric
current to reduce the risk of electric
shock. This tool is equipped with an
electric cord having an equipment
grounding conductor and a grounding
plug. The plug must be plugged into a
matching outlet that is properly installed
and grounded in accordance with all
local codes and ordinances.
DO NOT MODIFY THE 3-PRONG
PLUG. If it will not fit the outlet, have the
proper outlet installed by a qualified
electrician. Improper connection of the
equipment-grounding conductor can
create a risk of shock. The conductor
with insulation having an outer surface
that is green (sometimes, but not always
with yellow stripes) is the equipment
grounding conductor.
REPAIR OR REPLACE DAMAGED OR
WORN CORD IMMEDIATELY, if repair
or replacement of the electric cord or
plug is ever necessary. DO NOT connect
the equipment-grounding conductor to
a live terminal,
SAVE THESE INSTRUCTIONS
Page 5