Craftsman 973.111330 Drill User Manual


 
A WARNING: Whenservicing,useonlyidentical
Craftsmanreqtacementparts. Useof anyother
pertmaycreatea hazardor causeproduct
damage,
Avoid using solvents when cJeantng plastic parts.
Most plastics are susceptible to darnege from various
types ofcommercial solvents and may be damaged
by their use. Use clean cloths to remove dirt, dust, oil,
grease, etc.
_ WARNING: Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating
oils, etc. come in contact with plastic parts. They
contain chemicals that can damnge, weaken or
destroy plastic.
Only the parts shown on pads list, page fifteen, are
intended to be repaired or reptaced by the customer,
All other parts should be replaced by a qualified
se n.'icetechnician at an authorized service facility.
_ WARNING: Do not attempt to modify this tool or
create accessopes not recommended for use
w_h this tool. Any such alteration or modification
is misuse and could result in a hazardous
COndition leading to possible sedous personal
injury.
Do not abuse power tools. Abusive practices can
damage tool as well as workplace.
BATTERIES
Your ddit's pettei'y peck is equipped with 9 nickst-
cadmium rechergeable bettedes. Length of service
from each charging wilt depend on the type of work
you are po_ng.
The batteries inthis too4have been designed to
provide maximum trouble free life. However, like ait
batteries, they will eventually wear out. Do not
disassemble battary pec_ and attempt to reqtaca the
pettedee. HandUng of these hettades, especially when
wearing dnge and jewelry, could resuR in a serious
bum.
To obtain the longest possible battery life, we suggest
the following:
Store and charge your batteries in a cool area,
Temperatures above normal room temperature
will shorten battery life,
Never store batteries in a dischergeq condition,
Recharge them immediately after they are
discharged.
All hettbaes gradually lose thstr charge. The
higher the temperature the quicker they _ their
charge. If you store your tool for idng periods of
time without using it, recharge the batteries every
month or two. This practice will protorig battery
life.
_ o pfe_tve rmtur_ reeources, pid_me
recycta o_dispose of properly.
This product contains nickel-
cadmium batteries. Lecal, state or
federal laws may prohibit disposal of
nickel-cadmium battehes in ordinary
trash.
Consult your local waste authority for information
regarding available recy_ing and/or disposal options.
BAI"I'ERY PACK REMOVAL AND
PREPARATION FOR RECYCLING
_ WARNING: Upon removal, cover the battery
pack's terminals with heavy duty adhesive tape.
Do not attempt to destroy or disassemble battery
peck or remove any of its components. Nickel-
cadmium better;as must be recycled or disposed
of properly. Also, never touch both terminals with
metal objects and/or body parts as short circuit
may result. Keep away from children. Failure to
comply with these wamings could result in fire
and/orseridus injury.
13