Craftsman SP5373 Dust Collector User Manual


 
_ CAUTION: if usingthts Dust Collection System
to help keep airborne wood dust in heavy usage
within acceptable limits, you must regularly monitor
air borne dust andmaintain Dust Collection System
to avoid exceeding dust limits. Each application is
unique. Your maintenance schedule must, there-
fore, be tailored to your specific use of this Dust Col-
lection System.
Safety is a combination of common sense, staying alert
and knowing how your Dust Collection System works.
BEFORE USBNG THE DUST COLLECTION
SYSTEM:
_ WARNING: TO AVOID MISTAKESTHATCOULD
RESULT IN SERIOUS, PERMANENT INJURY, DO
NOT CONNECT POWER CORD UNTIL THE FOL-
LOWING STEPS HAVE BEEN SATISFACTORILY
COMPLETED:
1. Assembly, mounting and alignment.
2. Learn the function and proper use of the ON-OFF
switch.
3. Read and understand all safety instructions and
operating procedures throughout the manual.
4. Read the following labels which appear on the top
and bottom of filtration housing and sides of motor,
WARNmNG
Metal shavings or dust can set
sawdust on fire.
Collect wood materials onty.
Do not collect metal shavings
or dust.
See manual for details,
Risk Of electrical shock.
Use indoors in dry area,
Do not use outdoors or on wet
surfaces.
Sparks can ignite vapors from !
flammable products,
Do not use around flammabie
products.
If connected to a circuit protected
by fuses, use time delay fuses
with this appliance,
Electrical: 120 volts, 60 Hz AC onty, 7 amp
BEFORE EACH USE:
1. inspect your Dust Collection System. if any parts
are missing, bent, or faiJin any way, or any electri-
cal components do not work properly, turn off the
Dust Collection System, remove switch key, and
remove power supply cord from power supply.
Replace damaged, missing or failed parts before
using the Dust Collection System again.
2. Plan your work to protect your eyes, hands, face,
ears and body.
WEAR YOUR
A. WEAR SAFETY GOGGLES, FORESIGHT iS
BETTER THAN NO SIGHT. Wear sale',y
goggles, not glasses, that comply with ANSE
Z87.t (shown on label). Operaling any power
toot can result in foreign objects being tllown
into the eyes which can result in permanent eye
damage. Safety goggles are available at Sears
retail catalog stores, Use of glasses or goggles
not in compliance with ANSI Z87.1 could result
in severe injury from breakage of theeye protec-
tion.
B. When cleaning collection bags, wear a dust
mask.
WARNmNG
Hazardous moving parts inside
Unplug before removing inlet guard,
Attach inlet guard before plugg ing in,