Filter
Top Products
Back-Panel Connectors (per EMM)
• Supports Mini-SAS HD to Mini-SAS cable universally keyed. The following
lengths are currently supported:
SCv2080 to SC180:
– 0.5 m
– 2 m
– 3 m
– 5 m
NOTE: SAS connectors are SFF-8086/SFF-8088 compliant.
LED Indicators
Front panel
• One two-digit LCD indicator for Unit ID, error code, and unit location
identifier
• One two-color LED indicator for power status
• One single-color LED indicator for module fault status (expansion
enclosure as a whole)
• One single-color LED indicator for logical fault status (drive, HBA, RAID
controller, and so on)
• One single-color LED indicator for drawer 1 fault status
• One single-color LED indicator for drawer 2 fault status
Drawer
• One single-color LED indicator for sideplane card and power status
• One single-color LED indicator for drawer fault status
• One single-color LED indicator for logical fault status
• One single-color LED indicator for cable fault status
• Six single-color LED indicators for data transfer status
Disk Drive In Carrier
(DDIC)
• One single-color LED for drive fault status
6 Gb SAS IO module 14 one-color LED status indicators, four each for the three SAS ports and two
for the module status
Cooling module
• One single-color LED indicator for module status
• One single-color LED indicator for battery fault status (not currently used)
• One single-color LED indicator for fan fault status
Power Supply Unit (PSU)
• One single-color LED indicator for PSU fault status
• One single-color LED indicator for AC power fault status
• One single-color LED indicator for power status
Power Supplies
AC power supply (per power supply)
Wattage 2.8 kW
Voltage 200–240 VAC (16 A)
Heat dissipation 191-147 W
11