Filter
Top Products
Figure 5. Power Cables
3. Secure each power cable to the expansion enclosure chassis using the strain relief fasteners.
4. Plug the other end of the power cables into a grounded electrical outlet or a separate power source
such as an uninterrupted power supply (UPS) or a power distribution unit (PDU).
CAUTION: Be careful when closing the rear rack door to ensure that power cords have
adequate space as some racks might not be sufficiently deep.
Turning on the Expansion Enclosure
Turn on the SC180 expansion enclosure after racking and cabling all of the Storage Center components.
Turn on the expansion enclosure by pressing both power switches at the same time.
Figure 6. Location of the SC180 Expansion Enclosure Power Switches
The status indicator on the front of the expansion enclosure turns green when the expansion enclosure is
powered up and operational.
9